Hapax Fixing Pro

Hidden fastening system for wooden boards

The invisible fastening system, Hapax FIXING PRO, is the reference among the fastening systems for wooden terraces. This innovative system is recommended by the majority of professionals because of its quality and durability. Moreover, Hapax FIXING PRO is completely invisible, aesthetic and, above all, quick to use.

Thanks to a thickness of 13 mm, there is excellent ventilation between the shelves and the beams of the terrace so that the life of the terrace is increased.

Hapax FIXING PRO is the only system that can be flexibly and universally used thanks to the 3 separate zones, for decking boards with a width of 90 to 200 mm and a thickness of 19 to 40 mm.

In addition, it is possible to replace one faulty plank without having to dismantle the entire terrace. Hapax FIXING PRO is supplied together with stainless steel C2 or stainless steel A4 screws.

ADVANTAGES

1 Separates the boards from the joists: reduces the risk of dimensional variations of the wooden deck.

2 Creates an excellent ventilation between the boards and joists: improves the stability of the boards of the wooden deck.

3 Prevents stagnant water and early rotting of the wood: reduces the risk of distortion of wooden boards and extends the life span of the wooden deck.

4 Possible to change one board without damaging the rest.

5 Improves the comfort of the wooden deck: provides extra comfort because of its shock absorbing characteristics.

USABLE WITH

Can be used with the following types of wood: Ipe, African Padauk, bamboo,
ash, poplar and oak, accoya, kiln dried cumaru, kiln dried tali, kiln dried Afrormosia,
Afzélia, kiln dried Bankirai, kiln dried Iroko, Merbau, Moabi, Sapelli,
Sipo, kiln dried Tatajuba, Teak, Canadian Western Red Cedar.

CHOICE OF 2 SETS WITH STAINLESS STEEL C2 SCREWS

1. Hapax Fixing Pro with stainless steel C2 screws (AISI 410) | HAP010C00FIXPRO3

100 Fixing Pro connectors
200 stainless steel C2 screws 5,5x30 mm
100 stainless steel C2 screws 5,5x35 mm

For boards with a width of 90-160 mm and 19-27 mm high.

2. Hapax Fixing Pro with stainless steel C2 screws (AISI 410) | HAP011C00FIXPRO3

100 Fixing Pro connectors
300 stainless steel C2 screws 5,5x30 mm

For boards with a width of 90-200 mm and 28-40mm high.

3. Hapax Fixing Pro with stainless steel A4 screws (AISI 316) | HAP010B00FIXPRO3

100 Fixing Pro connectors
200 stainless steel A4 screws 5,5x30 mm
100 stainless steel A4 screws 5,5x35 mm

For boards with a width of 90-160 mm and 19-27 mm high.
For installation in swimming pools or near the coast

STAINLESS STEEL C2 SCREWS FOR HAPAX FIXING PRO

The screws are stainless steel C2 - AISI 410 with a countersunk head. The resistivity of these screws is more than 40% higher than for A2 stainless steel screws.

The treatment with special wax and the cutting tip accelerate screwing in and reduce the risk of splitting the wood during assembly. Alternatively available in A4 stainless steel for the most demanding conditions (close to the coast, swimming pools etc)

Available in 5.5x30 mm and 5.5x35 mm.